194446 - 7045A78 Front seat BACKREST FRAME. (one), left or right - R.R.

Removing ( Refitting ) Disconnect the negative battery terminal.    Op. 7045A10 L/H OR R/H FRONT SEAT (ONE) - R+R    Op. 7045J10 SWITCH UNIT FOR MOVEMENT OF ONE FRONT SEAT, L/H OR R/H - R+R FOR CHECK    Op. 7045A42 L/H OR R/H FRONT SEAT GUARD (ONE) - R+R[all the elements]    Op. 7045A98 FRONT SEAT REAR POUCH PANEL, LH OR RH - R R    Op. 7045A38 DEVICE FOR DRIVER`S SEAT SQUAB LUMBAR ADJUSTMENT - R R WITH SEAT REMOVED    Op. 5580C44 FRONT SIDE BAG MODULE ONE LH OR RH R R    Op. 7045B12 LH OR RH FRONT SEAT HEAD RESTRAINT - R R WITH FRONT SEAT REMOVED    Op. 7045B08 FRONT HEAD RESTRAINT PINS - R R Disconnect the electrical connections for the seat backrest motor.
DescriptionConnector
-Left front seat backrest motorN132
DescriptionConnector
-Left front seat backrest motorN135
1. Undo the fixing bolts (1a) and remove the electric motor for adjusting one of the front seat head restraints (1b) from the housing.
1. Rotate the electric motor for adjusting the head restraint and disconnect the electrical connectors (1a) and (1b).
DescriptionConnector
1aLeft front seat head restraint motorN131
DescriptionConnector
1bLeft front seat head restraint motorN134
2. Release the retaining spring (2a) and disconnect the head restraint movment flexible cable (2b), electric motor side.
1. Release the retaining spring (1a) and disconnect the cable (1b) from the head restraint adjustment device.2. Undo the fixing bolts (2a) and remove the retaining springs (2b).3. Remove the head restraint adjustment device.
1. On versions with heated seats, disconnect the electrical connector for the front seat backrest heating device.
DescriptionConnector
1Left front backrest heater padO048
DescriptionConnector
1Right front backrest heater padO049
2. Release the entire cover surround, starting from one side.
1. Separate the upholstery, complete with cover (1a), from the frame (1b).
Release the backrest wiring from the retaining springs, fastened to the frame, and remove it.1. Undo the fixing bolts (1a) and separate the frame (1b) from the cushion (1c).
Refitting ( Removing ) Position the backrest frame and secure it to the cushion using the bolts.Renew the backrest electrical wiring and secure it to the retaining springs located on the backrest frame.Fit the entire cover surround. Connect the electrical connector for the front seat backrest heating device.
DescriptionConnector
-Left front backrest heater padO048
DescriptionConnector
-Right front backrest heater padO049
Connect the head restraint adjustment cable to the electric motor and to the head restraint adjustment device.Fit the head restraint adjustment device in place and secure it using the bolts and retaining springs.Connect the cable to the head restraint adjustment device and secure it using the retaining spring.Connect the head restraint movement electric motor electrical connectors.
DescriptionConnector
-Left front seat head restraint motorN131
DescriptionConnector
-Right front seat head restraint motorN134
Place the motor for adjusting the electric front seat backrest angle in position and secure it using the bolts.Connect the electrical connectors for the electric motor.
DescriptionConnector
-Left front seat backrest motorN132
DescriptionConnector
-Left front seat backrest motorN135
Reposition the backrest movement control rod in the housing on the electric motor and secure it using the retaining spring.     Op. 7045B08 FRONT HEAD RESTRAINT PINS - R R    Op. 7045B12 LH OR RH FRONT SEAT HEAD RESTRAINT - R R WITH FRONT SEAT REMOVED    Op. 5580C44 FRONT SIDE BAG MODULE ONE LH OR RH R R    Op. 7045A38 DEVICE FOR DRIVER`S SEAT SQUAB LUMBAR ADJUSTMENT - R R WITH SEAT REMOVED    Op. 7045A98 FRONT SEAT REAR POUCH PANEL, LH OR RH - R R    Op. 7045A42 L/H OR R/H FRONT SEAT GUARD (ONE) - R+R[all the elements]    Op. 7045J10 SWITCH UNIT FOR MOVEMENT OF ONE FRONT SEAT, L/H OR R/H - R+R FOR CHECK    Op. 7045A10 L/H OR R/H FRONT SEAT (ONE) - R+RConnect the negative battery terminal.