80554 - 7045A38 DEVICE for LUMBAR ADJUSTMENT of driver's seat backrest - R.R. with seat removed

Removing ( Refitting )     See in Op. 7045J10 switch unit for movement of one front seat, l/h or r/h - r+r for check    See in Op. 7045A42 Front seat GUARD (one), left or right - R.R.- < R1 > [all the elements]    See in Op. 7045A98 Front seat rear pouch panel, left or right - R.R.1. Remove the retaining band for the head restraint adjustment flexible cable.2. Release the backrest cover upper surround.3. Disconnect the electrical connector for the lumbar adjustment motor.
DescriptionConnector
3 Driver's seat lumbar adjustment motorN038
4. Remove the backrest lumbar adjustment device (4a), acting on the retainers (4b).
Refitting ( Removing ) - Check that the backrest lumbar adjustment device is not damaged.1. Fit the backrest lumbar adjustment device (1a) in the housing and secure it using the retaining hooks (1b).2. Connect the electrical connector for the lumbar adjustment motor.
DescriptionConnector
2 Driver's seat lumbar adjustment motorN038
- Check the operation of the motor3. Fit the backrest cover upper surround.4. Fit the retaining band for the head restraint adjustment flexible cable.
    See in Op. 7045A98 Front seat rear pouch panel, left or right - R.R.    See in Op. 7045A42 Front seat GUARD (one), left or right - R.R.- < R1 > [all the elements]    See in Op. 7045J10 switch unit for movement of one front seat, l/h or r/h - r+r for check