850582 - 1060G50 PNEUMATICALLY CONTROLLED THROTTLE CASING - R.R.

Refitting

    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.- Disconnect the vacuum pipe from the vacuum unit.1. Undo the bolts fixing the throttle casing to the intake manifold.2. Remove pneumatically controlled throttle casing

Refitting ( Removing ) - Fit the throttle casing on the intake manifold.- Tighten the bolts fixing the throttle casing to the intake manifold.- Connect the vacuum pipe to the connector on the vacuum unit.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.