851023 - 1088E10 Radiator cooling FAN - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.    See in Op. 1048A56 UPPER RESONATOR - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.1. Undo the fixing nuts (1a) and remove the bonnet lock (1b) from the housing in the crossmember.2. Undo the lower nut (2a) and remove the lock reinforcement bracket (2b).
1. Undo the retaining bolts.2. Remove the upper front crossmember.
- Position a suitable container for collecting the engine coolant at the outlet of the upper pipe and the radiator.1. Disconnect the upper radiator pipe.- Remove the container for collecting the engine coolant and seal the housing in the radiator.
To disconnect the pipe, press the spring manually and release the rapid connector for the pipe from the retainer on the radiator.
1. Undo the nut and disconnect the earth lead from the bodyshell.
DescriptionConnector
1 Right front earthC011
2. Disconnect the electrical connections for the engine cables/fan-radiator cables coupling.
DescriptionConnector
2 Front/radiator couplingD009A
DescriptionConnector
2 Front/radiator couplingD009C
DescriptionConnector
2 Front/radiator couplingD009B
3. Undo the upper and lower bolts fixing the fan to the radiator assembly.4. Remove the fan assembly from the upper part of the engine compartment.
Refitting ( Removing ) - Fit the fan assembly in the special housing.- Tighten the upper and lower fixing bolts.- Connect the electrical connections for the engine cables/fan-radiator cables coupling.
DescriptionConnector
.Front/radiator couplingD009A
DescriptionConnector
.Front/radiator couplingD009B
DescriptionConnector
.Front/radiator couplingD009C
- Connect the earth lead to the bodyshell and secure it using the fixing nut.
DescriptionConnector
.Right front earthC011
- Connect the uppper engine coolant pipe to the radiator.- Fit the upper front crossmember and tighten the fixing bolts to torque.
Value - daNmFasteningComponentØ  
.0.6BoltsFRONT WING CROSSMEMBER HEADLAMP HOUSINGSM6
- Fit the bonnet lid lock complete with bracket and tighten the nuts fixing it to the upper crossmember and to the lower crossmember.    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1048A56 UPPER RESONATOR - R.R.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Fill the engine cooling system as described in the operation:    See in Op. 0010T20 Engine REFRIGERANT FLUID - Change- Remove the vehicle from the lift.