501013 - 7210A15 FRONT WING - HEADLAMP SEAT CROSSMEMBER

: The vehicle should be in the following condition before the operation: bonnet raised, front lock removed, air duct intake released.

Removing ( Refitting ) - Check whether the components connected are distorted by checking the bodyshell alignment using the special equipment (test benches, templates or jigs).1. Undo the fixing bolts (1a) and remove the crossmember (1b). Refitting ( Removing ) - Place the replacement part in position and secure it using the bolts.

When the operation is completed, refit the elements removed previously.