167575 - I90 THE FOLLOW ME HOME FUNCTION IS NOT ACTIVATED

The "Follow me home" function is not activated; the main beam headlamps and the dipped headlamps work normally;

The "Follow me home" function should be activated by the user within two minutes of the "key off" by operating the steering column switch unit in the headlamp flasher mode and the exterior lights control in the [PARK] or [0] positionIf the user keeps the flasher lever in the flasher position for more than two seconds the "Follow me home" function will be deactivated.the lights which come through the "Follow me home" function are the dipped headlampsthe time set by the user will be shown on the matrix that can be reconfiguredThe function should be "set" by the CONNECT.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
0	PRELIMINARY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check: that the "follow me home" function is activated at the CONNECT. the operation of the flasher	Move on to Step	1. Follow me home function not activated.	1. Activate the "Follow me home" function at the CONNECT
			2. Flasher not working	Move on to Step
1	STEERING COLUMN SWITCH UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the operation of the steering column switch unit in the headlamp flasher position (Wiring Diagram ) E2012 MAIN BEAMS	Move on to Step	Steering column switch unit faulty	Replace the steering column switch unit    See in Op. 5550A10 stalk unit assembly - r+r
2	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present		Fault persists	Replace body computer    See in Op. 5505A32 BODY COMPUTER - R.R.