177644 - 4410C12 Anti-roll bar JOINT - R.R.
Removing
(
Refitting
)
- Position the vehicle on a lift. See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.1. Undo the nuts fixing the joint to the anti-roll bar and to the selector fork.2. Separate the track rod ends (2a) from the anti-roll bar and from the housing in the selector fork, then remove the joint (2b).
Refitting
(
Removing
)
- Fit the joint fitting the two ends in the housing in the anti-roll bar and in the selector fork.- Tighten the fixing nuts to torque. | Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| . | 5.5 | Nut | FRONT ANTI-ROLL BAR JOINTS | M10 X 1.25 |
| Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| . | 5.5 | Nut | FRONT ANTI-ROLL BAR JOINTS | M10 X 1.25 |