177648 - 4410D16 BRACKET (ONE) fastening chassis to bodyshell - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Raise the vehicle on the lift1. Position the tool for supporting the power unit-chassis assembly (1a), complete with hydraulic jack, under the housings in the engine support frame (1b).

	Description	Code	Function
1a	Power unit support frame	1.870.835.000	Removing-refitting power unit

1. Undo the two rear bolts (1a) and the front bolt (1b) fixing the bracket (1c) securing the frame to the bodyshell. Refitting ( Removing ) 1. Position the bracket and tighten the front bolt (1a) and the rear bolt (1b) to the recommended torque.

	Value - daNm	Fastening	Component	Ø
1b	5	Bolt	FRONT SUSPENSION SUBFRAME	M10 X 1.25

	Value - daNm	Fastening	Component	Ø
1a	13	Bolt	FRONT SUSPENSION SUBFRAME	M12 X 1.25

Follow the tightening order for the bolts shown in the diagram.

- Remove the tool supporting the power unit - chassis assembly

	Description	Code	Function
.	Power unit support frame	1.870.835.000	Removing-refitting power unit

- Lower the vehicle- Remove the vehicle from the lift.