| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS |
|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic connector and check the following at the CAN: - no control unit not activated;
- that there are no faulty control units;
- no control unit with faulty CAN line;
| Move on to Step | Presence of faults | Continue following the instructions for the diagnostic equipment |
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Keeping the Examiner diagnostic equipment connected to the diagnostic connector, check the following at the instrument panel node:in active diagnosis ambient- the operation of the reconfigurable matrix.
| Move on to Step | Display not working | Replace instrument panel See in Op. 5560B11 ANALOGUE CONTROL PANEL - R.R. or Replace |
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | | | |
