377362 - 0010T21 ENGINE COOLANT - Check density and top up if necessary

    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Check that the level of the engine coolant is between the MIN and MAX marks on the coolant reservoir.
This check should be carried out after waiting for a few minutes with the engine switched off and the vehicle on a flat surface.
Do not remove the tank cap when the engine is hot as there is a risk of scalding.
- If necessary, top up the level, undoing the cap and introducing engine coolant.
DescriptionQty.ComponentTypeClassification
.PARAFLU UP8,4 LitriENGINE COOLING CIRCUITFluid-
DescriptionQty.ComponentTypeClassification
.PARAFLU UP8,6 LitriENGINE COOLING CIRCUITFluid-
Never exceed the MAX level
- Fit the cap.- Start up the vehicle and let the engine idle for a few minutes.- Check once again that the level of the engine coolant is between the MIN and MAX marks on the coolant reservoir.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.