501044 - 7210B55 BOOT FLOOR
- La vettura prima dell'intervento deve presentarsi nelle seguenti condizioni: paraurti staccato, traversa sacrificale posteriore staccata, rivestimento posteriore staccato
1. Remove the welds in areas (1a) and (1b) using a chamfering machine.2. Detach the boot floor and remove it.
Refitting
(
Removing
)
- Straighten the edges of the panel and grind the areas of the bodyshell affected and apply electro-galvanizing paint.1. Remove the anti-corrosion treatment along the perimeter of the replacement part using a rotary brush and apply electro-galvanizing paint.
1. Position the replacement part and secure it using self-locking clamps.- Check that the replacement part is correctly positioned.2. Spot welds in areas (2a) and (2b).
1. Weld in area (1a) and seam weld in area (1b).
- Check that the boot floor is correctly positioned.- Level the spot welds using a disc grinder.- Apply electro-galvanizing paint.
When the operation is completed, refit the elements removed previously. |