501065 - 7210A18 FRONT CROSSMEMBER

The vehicle should be in the following condition before the operation: front bumper removed.

Removing ( Refitting ) 1. Undo the fixing nuts (1a) and bolts (1b) and remove the crossmember (1c). Refitting ( Removing ) 1. Place the crossmember (1a) in position and tighten the nuts (1b) and bolts (1c) to torque.

	Value - daNm	Fastening	Component	Ø
.	2.5	Nut	FRONT CROSSMEMBER	M8

	Value - daNm	Fastening	Component	Ø
.	2.5	Bolt	FRONT CROSSMEMBER	M8

When the operation is completed, refit the elements removed previously.