501112 - 7210B45 REAR WING FRAME
The vehicle should be in the following condition before the operation: boot lid removed, rear wing removed. |
Refitting
(
Removing
)
1. Grind the surface of the bodyshell affected by the welding and apply electro-galvanizing paint to the surface treated.
1. Remove the anti-corrosion treatment using a rotary brush from the entire outer (1a) and inner (1b) perimeter of the replacement part and apply electro-galvanizing paint.
1. Position the replacement part (1a) and secure it using self-locking clamps (1b).- Check that the replacement part is correctly positioned.2. Weld in the areas shown in the diagram.3. Seam weld in the cutting areas (3a) and (3b).
- Check that the welded components are correctly positioned.- Level the spot welds using a disc grinder.- Clean the inner and outer parts using a rotary brush.- Apply electro-galvanizing paint to the parts ground.
When the operation is completed, refit the elements removed previously. |