501769 - 0010T11 ENGINE OIL - Check level and top up if necessary

- Release the dipstick.

This check should be carried out after waiting for a few minutes with the engine switched off and the vehicle on a flat surface.

- Using the dipstick, check that the oil is between the MIN and MAX levels on the actual dipstick.- The interval between MIN and MAX corresponds to about 1 kg fluid.- If necessary, top up the fluid by undoing the cap and adding engine oil.

	Description	Qty.	Component	Type	Classification
.	SELENIA TURBODIESEL	5 Litri	ENGINE LUBRICATION SYSTEM	Oil	SAE 10W40-ACEA B3-API CD

Never exceed the MAX level

- The following fluid is recommended for temperatures down to - 15°.

	Description	Qty.	Component	Type	Classification
.	SELENIA WR DIESEL	5 Litri	ENGINE LUBRICATION SYSTEM	Oil	SAE 5W40-ACEA B4-API CF

- If the lubrication system is completely drained (engine, filter and oil heat exchanger), the amount of oil to be introduced into the circuit is 6 litres. - Fit the cap.- Start up the vehicle and let the engine idle for a few minutes.- Switch off the engine and wait for a few minutes.- Check the level of the oil once again using the dipstick.