| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS |
|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node in parameters ambient:- the presence of the siren
In errors ambient: - that there are no faults with the siren
- that there are no faults with the A-BUS
| Move on to Step | 1. Siren faulty | Move on to Step |
| 2. Fault at A-BUS | Move on to Step |
| 3. Siren not present | 3. Check the conformity of the vehicle |
| 2 | ELECTRICAL SYSTEM CHECK. | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the siren supply and earth (Wiring Diagram ) E7015 ALARM | Move on to Step | Fault with electrical equipment | Restore the electrical connection (Wiring Diagram ) E7015 ALARM |
| 3 | ELECTRICAL SYSTEM CHECK. | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity and the insulation of the A-BUS line between the Body Computer Node Computer and Siren (Wiring Diagram ) E7015 ALARM | Move on to Step | Fault at A-BUS line | Restore the electrical connection (Wiring Diagram ) E7015 ALARM |
| 4 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node in parameters ambient:- the operation of the siren
| Move on to Step | The siren is not activated | Replace the siren See in Op. 5580E40 ANTI-THEFT SIREN - R.R. |
| 5 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | | Fault persists | Replace body computer See in Op. 5505A32 BODY COMPUTER - R.R. |
