| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS |
|---|
| 0 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the diagnostic test equipment (Examiner or other instruments) to the Body Computer.Check the following at the CAN:- that there are no faulty control units;
- no control unit with faulty CAN line;
| Move on to Step | Presence of errors | Continue following the instructions for the diagnostic equipment |
| 1 | OIL LEAKS CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that there are no oil leaks from:- calipers;
- master cylinder - braking circuit
| Move on to Step | 1. Oil leak from one front caliper | 1. Replace the faulty caliper See in Op. 3310A30 FRONT BRAKE CALIPER (one) - R.R. - Includes bleeding air |
| 2. Oil leak from one rear caliper | 2. Replace the faulty caliper See in Op. 3310B36 REAR BRAKE CALIPER (one), left or right - R.R. |
| 2 | BRAKE WEAR CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the brakes for wear and the condition of the braking surfaces | Move on to Step | 1. Brakes very worn | 1. Overhaul the brakes |
| 2. Discs vitrified or with traces of grease | 2. Clean and check the causes |
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Test the vehicle before returning it to the customer, checking that the problem no longer exists. | The test is essential because the braking system is one of the vehicle's safety systems. |
| | | |