| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS |
|---|
| 0 | PRELIMINARY CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that there is no A.B.S. warning light failure message at the matrix | Move on to Step | Warning light fault message present | Move on to Step |
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic connector and check the following at the instrument panel node:in active diagnosis ambient- the operation of the ABS warning light
| Move on to Step | The warning light does not come on. | Replace instrument panel See in Op. 5560B11 ANALOGUE CONTROL PANEL - R.R. or Replace |
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic connector and check the following at the brake node:in active diagnosis ambient- the operation of the ABS warning light
| Move on to Step | The warning light does not come on | Replace the brake node |
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that it is working properly | | | |
