K95 INSTRUMENT PANEL NOT WORKING - Lancia - THESIS - eLearn

With the ignition on, the warning lights are not timed and the instruments are not working with the engine running;

the instrument panel is completely switched off.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment to the diagnostic connector check the following at the instrument panel node:in errors ambient that there are no faults	Move on to Step	1. Presence of faults	1. Continue following the instructions in the diagnostic table
		Move on to Step	2. It is impossible to establish a dialogue with the instrument panel node	Move on to Step
2	ELECTRICAL SYSTEM CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Remove the instrument panel and check for the supply positives and panel earth (Wiring Diagram ) E4010 INSTRUMENT PANEL	Move on to Step	No positive/earth	Restore the correct connections / supplies (Wiring Diagram ) E4010 INSTRUMENT PANEL
3	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present		Fault persists	Replace instrument panel See in Op. 5560B11 ANALOGUE CONTROL PANEL - R.R. or Replace