78177 - 2110C20 SEALS FOR gearbox input shaft - Replace with gearbox removed

Removing ( Refitting ) 1. Undo the bolts (1a) and remove the main shaft seal and actuator/clutch (1b) complete with gasket. Refitting ( Removing ) - Fit a new main shaft cover complete with gasket matching it with the clutch actuator fastening both to the recommended torque.

	Value - daNm	Fastening	Component	Ø
1a	0.7 - 1.1	Bolt	MANUAL GEARBOX/DIFF. INPUT SHAFT SEAL	M6