78773 - 4130B10 POWER ASSISTED STEERING FLUID RESERVOIR - R.R. - Includes bleeding air

Removing ( Refitting ) - Disconnect the negative battery terminal.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 5050B34 WINDSCREEN WIPER ARM(S) for front windscreen wiper complete with blade    See in Op. 7055A18 Winsdcreen base TRIM - R.R.1. Working on the retaining band, release the reservoir from the mounting bracket.- Seal the air breather pipe on the cap.2. Turn the power assisted steering fluid reservoir over and disconnect the pipes (2a) and (2b) sealing them to prevent the fluid from escaping.3. Remove the power assisted steering fluid reservoir keeping it turned upside down and drain the fluid into a suitable container.- Thoroughly clean any fluid that comes out of the pipes and the reservoir from the bodywork.
Refitting ( Removing ) - Fit the power assisted steering fluid reservoir and connect the two pipes to it.- Fasten the power assisted steering fluid reservoir to the bracket using the band.- Refill the power assisted steering system using the appropriate fluid.
DescriptionQty.ComponentTypeClassification
.TUTELA HP 20--OilCircuito servosterzo
- Continue with the bleeding procedure following the instructions given below.- With the front wheels raised off the ground and the engine switched off, carry out 4 or 5 complete rotations of the steering wheel (left and right).- Check and, if necessary, top up the power assisted steering fluid level.- Position the vehicle on the ground and start up the engine.- Carry out 4 or 5 complete rotations of the steering wheel (left and right).- If necessary, top up the power assisted steering fluid level.    See in Op. 7055A18 Winsdcreen base TRIM - R.R.    See in Op. 5050B34 WINDSCREEN WIPER ARM(S) for front windscreen wiper complete with blade    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.