78800 - 4130B40 Supply PIPE from PUMP to POWER ASSISTED STEERING BOX - R.R. Includes bleeding air

Removing ( Refitting ) - Position the vehicle on a lift.1. Undo the bolt fixing the reaction rod to the bodyshell.
1. Undo the connector (1a) for the supply pipe (1b) from the power assisted steering pump.
    See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with removing the front suspension frame without dismantling the chassis components at the bench; carry out the appropriate operation- With the suspension frame detached, release the supply pipe from the pump to the power assisted steering box from the lower part of the vehicle. Refitting ( Removing ) - Fit the supply pipe from the pump to the power assisted steering box in the special housing in the engine.    See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with refitting the front suspension frame; carry out the appropriate operations- Connect the supplypipe to the power assisted steering pump.- Fit the power unit reaction rod and secure it using the bolt.
Value - daNmFasteningComponentØ  
.(to bracket on bodyshell) 5BoltPOWER UNIT REACTION RODM10 X 1.25
- Remove the vehicle from the lift.