5040A20 AIR CONDITIONING COMPRESSOR - R.R. - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY - Lancia - THESIS - eLearn

79155 - 5040A20 Air conditioning COMPRESSOR - R.R. - Includes fluid level check and top up if necessary

) See in Op. 7055B54 PROTECTION/GUARD under engine - R.R. See in Op. 0010T84 AIR CONDITIONING system COOLANT - Dry and repressurize See in Op. 4450B04 Right FRONT WHEEL (one) - R.R. See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R. See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R. See in Op. 1016A10 SOUND-PROOFING COVER - R.R. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R. See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R. See in Op. 1048A56 UPPER RESONATOR - R.R. See in Op. 1092G10 Engine components single drive BELT - R.R. See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.1. Undo the fixing nuts (1a) and remove the bonnet lock (1b) from the housing in the crossmember.2. Undo the lower nut (2a) and remove the lock reinforcement bracket (2b).

1. Undo the retaining bolts.2. Remove the upper front crossmember.

1. Unscrew bolt (1a), open band (1b) and remove the rigid air pipe to the heat exchanger (1c).

1. Unscrew bolts (1a) and disconnect high and low pressure pipes (1b) from the air conditioner compressor.2. Disconnect the electrical connection of the air conditioner comressor activation electromagnet.

	Description	Connector
2	Air conditioning compressor engagement electro-magnet	L020

1. Remove the multifunction control unit guard.

1. Unscrew multifunction ECU bolt (1a), disconnect the electrical connection of fan (1b) and move the multifunction ECU with wiring (1c) outside the working area.

1. Unscrew bolts (1a) and nut (1b) securing air conditioner compressor (1c) to the mount and remove.

Refitting ( Removing

) - Place the air conditioner compressor in position and tighten the fixing bolts.

	Value - daNm	Fastening	Component	Ø
.	3,5	Bolt	AIR CONDITIONER ASSEMBLY COMPRESSOR	M10 X 1.25

- Fit the multifunction ECU, tighten the bolts and connect the electrical connection.- Fit the multi-function control unit cover.- Connect the electrical connection of the air conditioner compressor activation electromagnet.

	Description	Connector
.	Air conditioning compressor engagement electro-magnet	L020

- Fit the high and low pressure pipes to the air conditioner compressor and tighten the bolts.- Position the air pipe to the heat exchanger, tighten the bolt and and connect to the hose using a retaining band.- Fit the upper front crossmember and tighten the fixing bolts to torque.

	Value - daNm	Fastening	Component	Ø
.	0.6	Bolts	FRONT WING CROSSMEMBER HEADLAMP HOUSINGS	M6

- Fit the bonnet lid lock complete with bracket and tighten the nuts fixing it to the upper crossmember and to the lower crossmember. See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R. See in Op. 1092G10 Engine components single drive BELT - R.R. See in Op. 1048A56 UPPER RESONATOR - R.R. See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R. See in Op. 1016A10 SOUND-PROOFING COVER - R.R. See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R. See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R. See in Op. 4450B04 Right FRONT WHEEL (one) - R.R. See in Op. 0010T84 AIR CONDITIONING system COOLANT - Dry and repressurize See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.