79164 - 5040A41 Air conditioning condenser FAN - R.R.

Refitting

    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.    See in Op. 1048A56 UPPER RESONATOR - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.    See in Op. 1088E10 Radiator cooling FAN - R.R. 1. If the assembly has to be dismantled at the bench, disconnect the electrical connector from the fan motor (1a), release the electrical wiring from the retaining springs and remove the fan management control unit (1b).2. Undo the bolts (2a) fixing the fan (2b) and separate it from the duct (2c).

Refitting ( Removing ) - Fit the fan on the duct.- Secure the wiring to the retaining springs and connect the connector to the fan motor.     See in Op. 1088E10 Radiator cooling FAN - R.R.    See in Op. 1048A10 COMPLETE AIR FILTER -R.R.    See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1048A56 UPPER RESONATOR - R.R.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Fill the engine cooling system as described in the operation:    See in Op. 0010T20 Engine REFRIGERANT FLUID - Change     See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.