79455 - 5520C10 HEATER PLUGS - R.R.

Removing ( Refitting ) - Open the boot and disconnect the negative battery terminal.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.1. Disconnect the electrical wiring from the heater plugs.
DescriptionConnector
1 Heater plugsA040A
DescriptionConnector
1 Heater plugsA040B
DescriptionConnector
1 Heater plugsA040C
DescriptionConnector
1 Heater plugsA040D
DescriptionConnector
1 Heater plugsA040E
2. Undo the heater plugs and remove them from the housing in the cylinder head.
Refitting ( Removing ) - Fit the heater plugs in the special housings.- Screw them in and then tighten them to torque.
Value - daNmFasteningComponentØ  
.1,5Spark plugGLOW PLUGSM12
- Connect the electrical wiring to the heater plugs.
DescriptionConnector
.Heater plugsA040A
DescriptionConnector
.Heater plugsA040B
DescriptionConnector
.Heater plugsA040C
DescriptionConnector
.Heater plugsA040D
DescriptionConnector
.Heater plugsA040E
    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery terminal.