79997 - 7010A14 Rear side DOOR - adjust centering and moulding - includes adaptation of hinges and seals on door compartment

Visually inspect for any irregularities in the opening between the side door and the rear wing and between the rear side door and the front side door.

1. Release the plastic protection (1a) and loosen the door check strap (1c) fixing bolts (1b).

- Carry out the operations described below for the transverse adjustment of the door in relation to the door housing seal.1. Undo the fixing bolts (1a) and remove the door striker (1b).

1. Loosen the nuts (1a) fixing the door hinges (1b).

It is advisable to work on the door hinges, one at a time.

- When the adjustment is completed, tighten the nuts fixing the door hinges and the bolts fixing the door striker to torque.

	Value - daNm	Fastening	Component	Ø
.	3.6	Nut	REAR DOOR HINGES	M8

	Value - daNm	Fastening	Component	Ø
.	2.4	Bolt	REAR DOOR STRIKER	M8

It is advisable to work on the door hinges, one at a time.

- Carry out the operations described below to adjust the door in a vertical and lengthwise direction.1. Loosen the nuts (1a) fixing the door hinges (1b).

- When the adjustment is completed, tighten the door hinge bolts to torque.

	Value - daNm	Fastening	Component	Ø
.	2.4	Bolt	REAR DOOR STRIKER	M8

- At the end of each adjustment, tighten the bolts fixing the door check strap.