850092 - 1028H58 CONNECTING ROD SMALL END BUSH (one) - Replace

Removing ( Refitting ) 1. Remove the bush (1a) from the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram.
DescriptionCodeFunction
1c Extractor/Fitting tool1.860.821.001Small end bush removal/introduction
Refitting ( Removing ) 1. Fit a new bush (1a) in the small end using a hydraulic press, a suitable plate (1b) and the tool (1c) constructed as illustrated in the diagram.
The bush should be fitted in the small end so that the lubrication port is aligned with the one in the small end.
DescriptionCodeFunction
1c Extractor/Fitting tool1.860.821.001Small end bush removal/introduction
- Ream the inner diameter of the small end bush to the recommended figure.
SubjectValue
.Small end bushmm
-Inner diameter26.006 ÷ 26.014