850537 - 1060F34 PIPE from fuel MANIFOLD to INJEJCTOR - R.R.

Removing ( Refitting )     See in Op. 1016A10 SOUND-PROOFING COVER - R.R.1. Undo connectors (1a) and (1b) and remove the pipes from fuel manifold to injectors (1c).
Use new pipes from the fuel manifold to the injectors when refitting.
Refitting ( Removing ) 1. Fit new pipes from the fuel manifold to the injectors and secure with connectors without tightening.2. Tighten the connectors for the pipes from the fuel manifold to the injector side injectors to the recommended torque using an appropriate commercial wrench.
Value - daNmFasteningComponentØ  
2 (injector side) 2ConnectorsINJECTOR FUEL MANIFOLD PIPEM12X1.5
3. Tighten the connectors for the pipes from the fuel manifold to the fuel manifold side injectors to the recommended torque using an appropriate commercial wrench.
Value - daNmFasteningComponentØ  
3 (manifold side) 2ConnectorsPIPE FUEL MANIFOLD TO INJECTORSM12X1.5
Clean the threaded sockets of the above pipes on the manifold and injectors using heptane.
    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.