1076B50 EXHAUST PIPE ATTACHMENT TO ENGINE/MANIFOLD - R.R. - Lancia - THESIS - eLearn

850757 - 1076B50 Exhaust PIPE attachment to engine/manifold - R.R.

) - Position the vehicle on the lift.- Raise the vehicle. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.1. Undo the bolts fixing the exhaust pipe to the manifold.2. Undo the nuts fixing the pipe to the catalytic converter.3. Release the pins (3a) from the rubber mountings (3b) on the bodyshell.4. Undo the nuts fixing the reinforcement bracket.5. Remove the front section of the exhaust pipe complete with gaskets.

Refitting ( Removing

) - Position the exhaust pipe gaskets.- Position the front section of the exhaust pipe.- Secure the pins to the rubber mountings.- Tighten the bolts fixing the pipe to the catalytic converter.

	Value - daNm	Fastening	Component	Ø
.	(catalytic converter) 2.8	Bolts	EXHAUST PIPE TO ENGINE	M8

- Tighten the bolts fixing the exhaust pipe to the manifold.

	Value - daNm	Fastening	Component	Ø
.	(Exhaust manifold) 2.8	Bolts	EXHAUST PIPE TO ENGINE	M8

- Tighten the nuts fixing the reinforcement bracket. See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Lower the lift and remove the vehicle from the lift.