851191 - 1048B20 Air supply HOSE from heat exchanger to rigid pipe -Replace

Removing ( Refitting )     See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.1. Undo the fixing nuts (1a) and remove the bonnet lock (1b) from the housing in the crossmember.2. Undo the lower nut (2a) and remove the lock reinforcement bracket (2b).
1. Undo the retaining bolts.2. Remove the upper front crossmember.
1. Disconnect the band securing the air supply hose to the rigid pipe.
    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 4450B12 Front WHEELS (two) - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.- (right side)    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.- (right side)    See in Op. 7210E10 FRONT BUMPER1. Disconnect the air supply hose to the rigid pipe from the heat exchanger.2. Remove the air supply hose to the rigid pipe.
Refitting ( Removing ) - Connect the air supply hose to the heat exchanger.    See in Op. 7210E10 FRONT BUMPER    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.- (right side)    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.- (right side)    See in Op. 4450B12 Front WHEELS (two) - R.R.- Connect the band securing the air supply hose to the rigid pipe.- Fit the upper front crossmember and tighten the fixing bolts to torque.
Value - daNmFasteningComponentØ  
.0.6BoltsFRONT WING CROSSMEMBER HEADLAMP HOUSINGSM6
- Fit the bonnet lid lock complete with bracket and tighten the nuts fixing it to the upper crossmember and to the lower crossmember.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.