851209 - 1060G72 Solenoid valve on vacuum reservoir for throttle casing pneumatic valve - R.R.
Removing ( Refitting ) See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R. See in Op. 1016A10 SOUND-PROOFING COVER - R.R. See in Op. 1060F50 FUEL RETURN MANIFOLD PIPE - R and R See in Op. 1060G70 VACUUM RESERVOIR - R.R.1. Undo the fixing bolts (1a), disconnect the vacuum pipes (1b), then remove the solenoid valve (1c) from the vacuum reservoir (1d).
Refitting
(
Removing
)
- Fit the solenoid valve on the vacuum reservoir and tighten the fixing bolts.- Connect the two vacuum pipes. See in Op. 1060G70 VACUUM RESERVOIR - R.R. See in Op. 1060F50 FUEL RETURN MANIFOLD PIPE - R and R See in Op. 1016A10 SOUND-PROOFING COVER - R.R. See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.