851236 - 1084C38 Engine oil supply and return pipes to cooling radiator - R.R.

Refitting

    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.    See in Op. 1048A56 UPPER RESONATOR - R.R.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r1. Undo the fixing nut and the bolt (1a) and remove the engine oil pipe mounting bracket (1b).

1. Undo the fixing bolts.2. Disconnect the flexible sections of the supply and return pipes from the rigid sections.- Release the variable geometry solenoid valve vacuum pipe from the rigid pipes.3. Undo the nuts fixing the rigid pipes to the heat exchanger.4. Remove the rigid engine oil supply and return pipes from the lower part of the engine compartment.

Refitting ( Removing ) - Fit the rigid engine oil supply and return pipes in the lower part of the engine compartment.- Replace the seals and tighten the nuts fixing the rigid pipes to the heat exchanger.- Replace the seals and tighten the bolts fixing the rigid pipes to the flexible pipes.- Position the vacuum pipe for the variable geometry solenoid valve.- Fit the mounting bracket for the rigid oil supply and return pipes and tighten the bolt and the nut.    See in Op. 1048A50 air inlet pipe to turbocharger - r + r    See in Op. 1048A56 UPPER RESONATOR - R.R.    See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.    See in Op. 1016A10 SOUND-PROOFING COVER - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.