851239 - 1084C39 Engine oil return PIPE to cooling radiator - R.R.

Refitting

    See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.- Position a suitable container for collecting the oil that comes out of the radiator and the pipes.1. Undo the fixing bolt (1a) and disconnect the flexible return pipe (1b) for the rigid section of the return pipe (1c).

- Open the plastic band joining the two flexible supply and return pipes.1. Undo the fixing bolt (1a) and disconnect the engine oil return pipe (2b) from the radiator, then remove it from the wheel arch.

Refitting ( Removing ) - Replace the seals at both ends of the pipe and connect it to the engine oil cooling radiator.- Secure the pipe tightening the fixing bolt to the radiator.- Connect the flexible pipe to the rigid section of the return pipe and tighten the fixing bolt.- Secure the flexible return pipe to the flexible supply pipe closing the plastic band.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Check the level in the lubrication system and, if necessary, top up following the instructions in the operation below:    See in Op. 0010T11 ENGINE OIL - Check level and top up if necessary- Remove the vehicle from the lift.