79622 - 5560B11 ANALOGUE CONTROL PANEL - R.R. or Replace

Removing ( Refitting ) - Open the boot and disconnect the negative battery terminal.    See in Op. 5580C18 AIR BAG MODULE - R.R.
Follow the safety instructions for this operation meticulously.
    See in Op. 7040A26 Steering column TRIM - R.R.    See in Op. 4110A24 Electric steering wheel position CONTROL - R.R.-    See in Op. 4110A10 STEERING WHEEL - R.R. for replacement or checks-    See in Op. 5505A10 Junction UNIT - R.R.    See in Op. 7040A23 Instrument panel SURROUND in dashboard1. Undo the fixing bolts (1a) and remove the analogue control panel (1b).2. Disconnect the electrical connector for the analogue control panel.
DescriptionConnector
2 Instrument panelE050A
DescriptionConnector
2 Instrument panelE050B
- Remove the analogue control panel. Refitting ( Removing ) - Connect the electrical connector for the analogue control panel.
if the control panel has to be replaced, the new component should undergo the Proxi initialization procedure using the diagnostic equipment (Examiner).
DescriptionConnector
.Instrument panelE050A
DescriptionConnector
.Instrument panelE050B
- Fit the control panel in the special housing in the dashboard tightening the fixing bolts.    See in Op. 7040A23 Instrument panel SURROUND in dashboard    See in Op. 5550A10 stalk unit assembly - r+r    See in Op. 5580C12 CLOCK SPRING for AIR BAG system - R.R.    See in Op. 4110A10 STEERING WHEEL - R.R. for replacement or checks-    See in Op. 4110A24 Electric steering wheel position CONTROL - R.R.-    See in Op. 7040A26 Steering column TRIM - R.R.    See in Op. 5580C18 AIR BAG MODULE - R.R.- Connect the negative battery terminal.