841007862 - E5060 CRUISE CONTROL OPERATIONAL DESCRIPTION

Operational Description

The Cruise Control function is managed by engine control unit M010 upon a request by Cruise Control control H007.Cruise Control H007 is ignition-operated ( INT ) at pin 2 , via a line protected by fuse F35 of underfacia junction unit B002.The control H007 is connected to the engine management control unit (connector A) for the ON/OFF signal, the RCL (RECALL) signal, the SET + signal and the SET - signal at pins 38, 56, 77 and 78 of the engine management control unit M010.Pins 17 and 80 of connector A of the engine management control unit M010 receive the brake pedal pressed signals coming from the N.A. and N.C. contacts of the brake lights switch I030, respectively, with the supply controlled by the ignition (INT) from the lines protected by fuses F35 and F37 of the junction unit under the dashboard B002. The engine management control unit M010 distributes the brake pedal pressed signal to the other control units installed on the vehicle via the C-CAN line, pins 61 and 62 connector A.Pin 79 of connector A of engine control unit M010 receives a signal from the contact of clutch switch I031 , also for the purposes of programmed function deactivation.    See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENTEngine control unit M010 is connected via the C Can line from pins 83 and 84 of connector A to Body Computer M001 , pins 32 and 33 of connector B. Body Computer M001 in turn sends a B Can signal to instrument panel E050, which indicates system faults via a message on the display .