115283 - 7065A12 FRONT SEAT BELT (ONE), LEFT OR RIGHT, WITH PRETENSIONER ON REEL - R.R.

Removing ( Refitting ) - Disconnect the negative battery terminal.    See in Op. 7040H36 CENTRE PILLAR TRIM LOWER ELEMENT (one), left or right - R.R.    See in Op. 7040H38 CENTRE PILLAR TRIM UPPER ELEMENT (one), left or right - R.R.1. Undo the nut fixing the seat belt height adjuster.2. Undo one bolt (2a) fixing the bracket to the pillar and loosen the bolt (2b) rotating the bracket (2c).3. Disconnect the electrical connection.
DescriptionConnector
3 Driver's front seat belt pretensionerQ020
DescriptionConnector
3 Front passenger seat belt pretensionerQ021
4. Undo the fixing bolt (4a) and remove the seat belt and pretensioner (4b).
- Place the pretensioner in the special cupboard, resting it on a free surface. Refitting ( Removing ) 1. Reposition the pretensioner.
Handle the pretensioner very carefully. Make sure that the battery is disconnected.
2. Tighten the bolt to the recommended torque.
Value - daNmFasteningComponentØ  
2 4BoltSEAT BELT REEL SECTION7/16"
3. Position the seat belt idler (3a) and tighten the nut (3b) to the recommended torque.
Value - daNmFasteningComponentØ  
3b (upper fastening to centre pillar) 4NutSEAT BELT REEL SECTION7/16"
4. Connect the electrical connection.
DescriptionConnector
4 Driver's front seat belt pretensionerQ020
DescriptionConnector
4 Front passenger seat belt pretensionerQ021
5. Rotate the bracket (5a) on the pillar, placing it in the correct position and tighten the fixing bolts (5b).
    See in Op. 7040H38 CENTRE PILLAR TRIM UPPER ELEMENT (one), left or right - R.R.    See in Op. 7040H36 CENTRE PILLAR TRIM LOWER ELEMENT (one), left or right - R.R.- Connect the battery terminal.