155789 - 3340B57 RIGID PIPE from hydraulic CONTROL UNIT to RIGHT FRONT BRAKE - R.R. with power unit removed

Removing ( Refitting )     See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air1. Undo the connector (1a), remove the spring (1b) and release the flexible section from the rigid section of the brake pipe.
1. Release the rigid pipe (1b) from the retaining bands on the engine compartment bulkhead and remove it without damaging it.
Refitting ( Removing ) - Position the pipe securing it to the retaining bands on the engine compartment bulkhead.- Connect the flexible section to the rigid section of the brake pipe.- Tighten the connector joining the rigid section to the flexible section to torque.
Value - daNmFasteningComponentØ  
.1.4ConnectorBRAKING SYSTEM PIPE BRAKESM10
    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air