177596 - 4410B45 Lower front track control ARM R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery terminal.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 4410A80 Lower fork connecting front suspension SHOCK ABSORBER to LOWER TRACK CONTROL ARM (one), left or right - R.R.1. Undo the nut fixing the track control arm to the steering knuckle.
1. Extract the end (1a) of the front track control arm using a USAG-FACOM U.16A32 type extractor (1b) or a similar tool.
1. Undo the fixing bolts.2. Remove the track control arm.
Refitting ( Removing ) - Position the track control arm and secure it to the front suspension frame tightening the bolts to the recommended torque.
Value - daNmFasteningComponentØ  
.7.4BoltLOWER FRONT TRACK CONTROL ARMSM10x.1.25
- Position the track control arm ball joint in the special housing and secure it tightening the nut to the recommended torque.
Value - daNmFasteningComponentØ  
.(front steering knuckle) 9NutLOWER FRONT TRACK CONTROL ARMSM14X1.25
    See in Op. 4410A80 Lower fork connecting front suspension SHOCK ABSORBER to LOWER TRACK CONTROL ARM (one), left or right - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Connect the negative battery terminal.- Remove the vehicle from the lift.    See in Op. 4450A10 FRONT WHEEL GEOMETRY - Check using optical equipment - Includes front wheel toe-in adjustment if necessary