177601 - 4410B47 Lower rear track control ARM R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery terminal.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.1. Undo the nut fixing the track control arm to the steering knuckle.
1. Extract the end (1a) of the rear track control arm using a USAG-FACOM U.16A32 type extractor (1b) or a similar tool.
1. Undo the bolt fixing the rear lower track control arm.2. Remove the rear lower track control arm from the housing.
Refitting ( Removing ) - Position the arm in the special housing and secure it by tightening the bolt to the recommended torque.
Value - daNmFasteningComponentØ  
.(front suspension frame) 10BoltLOWER FRONT TRACK CONTROL ARMSM12 X 1.25
- Position the ball joint and secure it to the steering knuckle tightening the nut to the recommended torque.
Value - daNmFasteningComponentØ  
.(front suspension steering knuckle) 9NutLOWER FRONT TRACK CONTROL ARMSM14 X 1.5
    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.    See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.- Connect the negative battery terminal.- Remove the vehicle from the lift.    See in Op. 4450A10 FRONT WHEEL GEOMETRY - Check using optical equipment - Includes front wheel toe-in adjustment if necessary