189997 - 1088C22 water pump pulley - r r

Removing ( Refitting ) - Position the vehicle on a lift.- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- Raise the vehicle on the lift.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.1. Loosen the bolts (1a) fixing the water pump pulley (1b).
    See in Op. 1092G10 Engine components single drive BELT - R.R.- Completely undo the bolts and remove the water pump pulley. Refitting ( Removing ) - Position the pulley and bring the fixing bolts close to it.    See in Op. 1092G10 Engine components single drive BELT - R.R.- Tighten the bolts fixing the pulley to the recommended torque.
Value - daNmFasteningComponentØ  
.0.9BoltWATER PUMP PULLEYM6
    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.- Lower the vehicle on the lift.    See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.