192783 - 5520G12 SWITCH ON BRAKE PEDAL FOR KEYLESS-GO SYSTEM - R.R. FOR VEHICLES WITH AUTOMATIC TRANSMISSION

Removing ( Refitting ) - Open the boot and disconnect the negative battery terminal.1. Undo the bolts fixing the trim under the dashboard, driver's side.2. Remove the trim under the dashboard, driver's side.
1. Disconnect the electrical connection for the brake pedal switch.
DescriptionConnector
1 Switch on brake pedalI030
2. Undo and remove the switch (2a) from the brake pedal (2b).
Refitting ( Removing ) - Fit the switch on the brake pedal.- Connect the electrical connection.
DescriptionConnector
.Switch on brake pedalI030
- Fit the trim under the dashboard, driver's side.- Connect the negative battery lead, then close the boot.