194791 - 7045D31 SQUAB TRIM OF ONE FRONT SEAT LH OR RH RR WITH SEAT REMOVED

Removing ( Refitting )     Op. 7045J10 SWITCH UNIT FOR MOVEMENT OF ONE FRONT SEAT, L/H OR R/H - R+R FOR CHECK    Op. 7045A42 L/H OR R/H FRONT SEAT GUARD (ONE) - R+R[all the elements]    Op. 7045A98 FRONT SEAT REAR POUCH PANEL, LH OR RH - R R    Op. 7045B12 LH OR RH FRONT SEAT HEAD RESTRAINT - R R WITH FRONT SEAT REMOVED    Op. 7045B08 FRONT HEAD RESTRAINT PINS - R R 1. Disconnect the electrical connector for the front seat backrest heating device.2. Release the entire cover surround, starting from one side. 1. Separate the upholstery, complete with cover (1a), from the frame (1b). 1. Separate the cover (1a) from the upholstery (1b), removing the retaining seals (1c). Refitting ( Removing ) Check that the trim is not damaged.If it is, replace the cover.

Never repair the cover. Only use new covers. Any type of backrest cover that is not specifically designed for this particular type of seat cannot be used under any circumstances.

1. Fit the cover (1a) on the upholstery (1b) and secure it using new retaining seals (1c) using special pliers.

	Description	Code	Function
.	Pliers for metal points	1.878.017.001	Fastening cover to upholstery

Mould the cover onto the upholstery.Fit the upholstery complete with cover on the front seat backrest frame.1. Fit the entire cover surround. 2. Connect the electrical connector for the front seat backrest heating device.     Op. 7045B08 FRONT HEAD RESTRAINT PINS - R R    Op. 7045B12 LH OR RH FRONT SEAT HEAD RESTRAINT - R R WITH FRONT SEAT REMOVED    Op. 7045A98 FRONT SEAT REAR POUCH PANEL, LH OR RH - R R    Op. 7045A42 L/H OR R/H FRONT SEAT GUARD (ONE) - R+R[all the elements]    Op. 7045J10 SWITCH UNIT FOR MOVEMENT OF ONE FRONT SEAT, L/H OR R/H - R+R FOR CHECK