197556 - 7050J42 Rear seat head restraint folding motor (one), left or right - R.R.

Removing ( Refitting ) - Disconnect the negative battery terminal.    See in Op. 7050A20 Single rear seat cushion - R.R.    See in Op. 7050A19 REAR SEAT BACKREST - R.R.1. Release the part connected to the heater pad and remove it from the housing for the head restraint pins.
1. Release the cover along the backrest perimeter for the part connected to the heater pad.
- Lift up the backrest cover complete with upholstery.1. Remove the protection for the rear seat head restraint motor.
1. Disconnect the electrical connector (1a) and remove the rear seat head restraint folding device (1b) from the housing.
DescriptionConnector
1a Left rear head restraint folding motorN120
DescriptionConnector
1a Right rear head restraint folding motorN121
DescriptionConnector
1a Centre rear head restraint folding motorN122
Refitting ( Removing ) - Fit the head restraint folding motor in the housing and connect the electrical connector.
DescriptionConnector
.Left rear head restraint folding motorN120
DescriptionConnector
.Right rear head restraint folding motorN121
DescriptionConnector
.Centre rear head restraint folding motorN122
- Fit the protection for the rear seat head restraint motor.- Reposition the backrest cover complete with upholstery.- Fit the cover surround along the perimeter.- Fit the head restraint pins in place.    See in Op. 7050A19 REAR SEAT BACKREST - R.R.    See in Op. 7050A20 Single rear seat cushion - R.R.- Connect the negative battery terminal.