501016 - 7210A30 FRONT WING MOUNTING BRACKET
 | The vehicle should be in the following condition before the operation: bonnet open, front wing removed, wing crossmember removed, crossmember removed. |
Removing
(
Refitting
)
1. Using a chamfering machine and a drill, remove the spot welds in areas (1a), (1b) and (1c).2. Using a hammer and chisel, detach the front wing mounting bracket and remove it.
Refitting
(
Removing
)
- Straighten the edges of the panel along the surface of the bodyshell involved.- Thoroughly clean the perimeter of the bodyshell involved and apply electro-galvanizing paint.1. Remove the anti-corrosion treatment along the perimeter of the replacement part using a rotary brush and apply electro-galvanizing paint.- Position the replacement part and secure it using self-locking clamps.2. Weld at points (2a), (2b) and (2c).