74621 - 1008B20 Power unit rear support FLEXIBLE MOUNTING - Replace

Removing ( Refitting ) - Position the vehicle on a lift.- Open the boot and disconnect the negative battery terminal.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1008A46 Power unit RIGID MOUNT - TIMING side - R and R1. Undo the bolts (1a) fixing the flexible mounting (1b) to the engine supporting frame.- Remove the mounting from the top.
Refitting ( Removing ) - Position the mounting in its housing in the engine supporting frame.- Tighten the bolts fixing the flexible mounting to the engine supporting frame to the recommended torque.
Value - daNmFasteningComponentØ  
.5.8BoltINTERM RUBBER MOUNTM10 X 1.25
    See in Op. 1008A46 Power unit RIGID MOUNT - TIMING side - R and R    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead, then close the boot.- Remove the vehicle from the lift.