75114 - 1076A40 Exhaust pipe HEAT SHIELDS - R.R.

Removing ( Refitting ) - Position the vehicle on the lift.    See in Op. 1076B20 Rear exhaust SILENCER - R.R.    See in Op. 1080B62 CATALYTIC CONVERTER - R.R.1. Undo the fixing nuts.2. Remove the exhaust pipe rear heat shield.
1. Undo the fixing nuts.2. Remove the retaining springs fastening the shield to the tank.3. Remove the exhaust pipe intermediate heat shield.
1. Undo the fixing nuts.2. Remove the side flexible mounting supporting the rigid section of the exhaust pipe.3. Remove the exhaust pipe front heat shield which is divided into three sections (3a), (3b) and (3c).
Refitting ( Removing ) - Fit the exhaust pipe front heat shield.- Tighten the nuts fixing the heat shield.
Value - daNmFasteningComponentØ  
.0,8NutEXHAUST PIPE GUARDSM6
- Fit the side flexible mounting supporting the rigid section of the exhaust pipe.- Fit the exhaust pipe intermediate heat shield.- Tighten the nuts fixing the intermediate heat shield.
Value - daNmFasteningComponentØ  
.0,8NutEXHAUST PIPE GUARDSM6
- Fasten the shield to the tank using the springs.- Fit the exhaust pipe rear heat shield.- Tighten the nuts fixing the rear heat shield.    See in Op. 1076B20 Rear exhaust SILENCER - R.R.    See in Op. 1080B62 CATALYTIC CONVERTER - R.R.- Remove the vehicle from the lift.