78681 - 3340B62 RIGID PIPE (one), left or right, from hydraulic control unit to rear brakes - R.R.

Removing ( Refitting )     See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air    See in Op. 1076A48 Catalytic converter HEAT SHIELD - R.R.    See in Op. 1080B62 CATALYTIC CONVERTER - R.R.    See in Op. 4410D10 Front suspension FRAME - R.R.- Proceed with removing the front suspension frame without dismantling the chassis components at the bench; carry out the appropriate operation.1. Undo the connector (1a), remove the retaining bands (1b) and release the rigid pipe from the lower part of the engine.
Refitting ( Removing ) - Fit the rigid pipe, securing it to the floor of the vehicle using the retaining bands.- Connect the connector joining the front section to the rear section.
Value - daNmFasteningComponentØ  
.1.4ConnectorBRAKING SYSTEM PIPE BRAKESM10
    See in Op. 1080B62 CATALYTIC CONVERTER - R.R.    See in Op. 1076A48 Catalytic converter HEAT SHIELD - R.R.    See in Op. 3340A12 A.B.S. hydraulic and electronic CONTROL UNIT - R.R. - Includes bleeding air    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A48 HOSE BETWEEN RESONATOR AND THROTTLE CASING - R.R.