90136 - 1008C10 Power unit REACTION ROD - Replace

Removing ( Refitting ) - Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.1. Undo the bolts (1a) and remove the power unit reaction rod (1b).
Refitting ( Removing ) - Fit the power unit reaction rod and secure it using the bolts.
Value - daNmFasteningComponentØ  
.(to bracket on bodyshell) 5BoltPOWER UNIT REACTION RODM10 X 1.25
Value - daNmFasteningComponentØ  
.(to engine support) 5BoltPOWER UNIT REACTION RODM10 X 1.25
    See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.- Connect the negative battery lead, then close the boot.    See in Op. 0010T21 ENGINE COOLANT - Check density and top up if necessary-