5580E74 AERIAL - PASSIVE ENTRY - REAR DOOR (ONE), LEFT OR RIGHT - R.R. - Lancia - THESIS - eLearn

151007 - 5580E74 AERIAL - PASSIVE ENTRY - rear door (one), left or right - R.R.

) - Disconnect the negative battery terminal. See in Op. 7010M10 Rear door electric window control SWITCH - left or right - R.R.1. Release the rear side door interior grab hand trim.

1. Undo the fixing bolts in the area of the grab handle.2. Lift up the door opening lever (2a), release the rubber cap (2b) and undo the bolt underneath (2c).3. Use the tool (3a) to remove the door panel (3b).

	Description	Code	Function
3a	Knife	1.878.077.000	Removing front side door inner panel

1. Undo the fixing bolts (1a), disconnect the electrical connector (1b) and remove the passive entry aerial (1c).

	Description	Connector
1b	RF aerial on left rear door for passive entry (NPE)	P096

	Description	Connector
1b	RF aerial on right rear door for passive entry (NPE)	P097

Refitting ( Removing

) - Connect the electrical connector and secure the passive entry aerial using the fixing bolts.

	Description	Connector
.	RF aerial on left rear door for passive entry (NPE)	P096

	Description	Connector
.	RF aerial on right rear door for passive entry (NPE)	P097

- Fit the inner door panel in place until the click of the retaining springs is heard.- Tighten the bolts fixing the door panel.- Reposition the trim for the side door grab hand. See in Op. 7010M10 Rear door electric window control SWITCH - left or right - R.R.- Connect the negative battery terminal.