75316 - 1088D24 RIGID PIPE for coolant inlet to water pump - R&R

Refitting

    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 1048A35 HOSE FROM FLOW METER TO RESONATOR - R.R.    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1088C36 THERMOSTAT MOUNTING - R.R.- [5505A27]1. Extract the rigid pipe from its housing and release it via the wheel arch.

Refitting ( Removing ) - Replace the 4 O-rings at the ends of the pipe.- Fit the water pump rigid inlet pipe, complete with O-rings, and check that it is correctly matched with the water pump cover.- [5505A27]    See in Op. 1088C36 THERMOSTAT MOUNTING - R.R.    See in Op. 1048A11 COMPLETE AIR FILTER -R.R.    See in Op. 1048A35 HOSE FROM FLOW METER TO RESONATOR - R.R.    See in Op. 1048A28 vacuum air circuit resonator pipe - r+r    See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.    See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.    See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.