3330B02 PEDAL ASSEMBLY - R.R. - Lancia - THESIS - eLearn - 4CarData

154733 - 3330B02 PEDAL ASSEMBLY - R.R.

Removing ( Refitting

) - Open the boot, remove the cover on the left hand side and disconnect the negative battery lead. See in Op. 4110A10 STEERING WHEEL - R.R. for replacement or checks- See in Op. 7040A26 Steering column TRIM - R.R. See in Op. 5550A12 complete stalk unit - r+r for versions with air bag See in Op. 7040A37 Fuse access cover in instrument panel - R.R. See in Op. 4110A30 Support with steering control shafts - R.R.-1. Work on the fastening springs (1a) and release the brake servo push rod (1b) from the pedal.

1. Disconnect the electrical connections for the switches (1a) on the brake pedal (1b).

	Description	Connector
1a	Switch on brake pedal	I030

	Description	Connector
1b	Switch on brake pedal	I030

1. Undo the nuts fixing the pedal assembly to the bodyshell (1a) and to the brake servo (1b).2. Extract the pedal assembly complete with brake pedal

Refitting ( Removing

) - Fit the pedal assembly in the housing and secure it tightening the nuts to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	(body) 2	Nuts	R.R. COMPLETE PEDAL ASSEMBLY	M8

- Connect the electrical connections for the switches on the brake pedal.

	Description	Connector
	Switch on brake pedal	I030

	Description	Connector
	Switch on brake pedal	I030

- Connect the brake servo push rod to the pedal applying pressure to fit it. See in Op. 4110A30 Support with steering control shafts - R.R.- See in Op. 7040A37 Fuse access cover in instrument panel - R.R. See in Op. 5550A12 complete stalk unit - r+r for versions with air bag See in Op. 7040A26 Steering column TRIM - R.R. See in Op. 4110A10 STEERING WHEEL - R.R. for replacement or checks-- Connect the negative battery terminal and position the cover on the left hand side of the luggage compartment.